Spectra II
Options
08.17
Operating Manual
57
7
Options
7.1 Cutter
CAUTION!
Risk of injury, particularly during maintenance, the cutter
blades are sharp!
⇒
Switch off the before attaching the cutter!
⇒
The cutter may only be used when it is mounted on
the printer!
⇒
Do not try to cut any materials which exceed the
maximum width or thickness specifications.
⇒
Do NOT touch the area of the moving blades!
7.1.1 Cutter Cleaning
For cleaning the cutter, the cutter can be moved manually.
After cleaning the cutter, the cutter is returned into the initial position.
7.1.2 General Parameters
Off:
The print order is processed without cutting.
Without backfeed:
A cut is effected after each label.
We recommend using this operating mode if no data which is to print
is in the upper part of the label.
With backfeed:
A cut is effected after each label.
Interval with final cut:
A cut is effected after a fixed number of labels which you have to enter
at the print start and additionally at the end of the print order.
Interval without final cut:
A cut is effected after a fixed number of labels which you have to enter
at the print start. At the end of the printer order no cut is effected
except when the set interval comes to the end of the print order.
Final cut:
A cut is only effected at the end of the print order.
Cutter cleaning
forward/backward
Cutter cleaning home
position
Cutter mode