Spectra II
Function Menu
08.17
Operating Manual
51
Indication of input signal level
0 = Low
1 = High
Port
Function
1
= Print start
2
= Cut
3
= Counter reset
4
= External synchronization of label position
5
= No function
6
= No function
7
= No function
8
= No function
Indication of output signal level
0 = Low
1 = High
Port
Function
9
= Error
10
= Print order active
11
= Label available at dispenser photocell – with dispenser
photocell
12
= Print end
13
= Ready
14
= RFID error – only with option RFID
15
= Scanner: bar code not readable – only with option scanner
16
= Ribbon prior warning
6.8.6 General Parameters
Settings:
Printout of all printer settings such as speed, label and
transfer ribbon material.
Bar codes:
Printout of all available bar code types.
Fonts:
Printout of all available font types.
Starting with firmware version 1.70, the printer logs different events
internally. In case of service, the error cause can be located faster.
With this command, different log files are saved on an existing storage
medium (memory card or USB stick). After the 'Finish' message the
storage medium can be removed.
The files are in directory 'log':
LogMemErr.txt:
Logged errors with additional information such as
date/time and file name/line number (for developers).
LogMemStd.txt:
Logging of selected events.
LogMemNet.txt:
Data latest send via port 9100.
Parameters.log:
All printer parameters in human readable form.
TaskStatus.txt:
Status of all printer tasks.
The files
LogMemErr.txt
and
LogMemStd.txt
are written in circle, i.e.
old contents are overwritten. The entry logged last is marked with „---„
I/O status input
I/O status output
Print examples
Write log files to
memory card