![background image](http://html1.mh-extra.com/html/curtis/kubota-m62-tlb/kubota-m62-tlb_installation-and-owners-manual_2699754011.webp)
11 of 37
STEP 5: Left Side Frame Cont.
5.5 Install two 1” long bolts and two nuts through the rear
panel, upper rear mount, and sideframe. (see Figure 5.5)
Leave hardware loose.
Hardware Used
QTY
5/16-18 x 1 Hex Head Flanged Cap Screw
2
5/16-18 Flanged Nylon Lock Nut
2
5.6 Install a 3/4” long bolt and nut at the bottom of the rear
panel. Install in the uppermost hole. (see Figure 5.5)
Leave hardware loose.
Hardware Used
QTY
5/16-18 x 3/4 Hex Head Flanged Cap Screw
1
5/16-18 Flanged Nylon Lock Nut
1
5.7 Fasten the side frame to the floor board (see Figure 5.7).
Leave hardware loose.
Hardware Used
QTY
5/16-18 x 3/4 Button Head Socket Cap Screw 3
5/16-18 Flanged Nylon Lock Nut
3
5.8 Fasten the ROPS clamp to the side frame (see Fig. 5.8).
Leave hardware loose.
Hardware Used
QTY
5/16-18 x 1 Hex Head Flanged Cap Screw
2
5.9 Fasten the side frame to the cowl (see Figure 5.9). Leave
hardware loose.
Hardware Used
QTY
5/16-18 x 3/4 Hex Head Flanged Cap Screw
5
5/16-18 Flanged Nylon Lock Nut
5
Figure 5.5: Side Frame to Rear Panel Bolts
Figure 5.7: Side Frame to Floor Board Bolts
Figure 5.8: Side Frame ROPS Clamp
1” Screws
3/4” Screw
Nut
Nuts
Button Head Screws
Flanged Nuts
Figure 5.9: Side Frame to Cowl Bolts
INSTALLATION