14 of 37
STEP 7: Rear Corner Fillers
7.1 Remove the rearmost fender bolts (both left and right
sides) and save for reuse.
7.2 Install the left rear corner filler to the vehicle (see Figures
7.1 and 7.2). Tighten the two 1/4-20 screws and leave the
remaining hardware loose.
Hardware Used
QTY
1/4-20 x 3/4 Hex Head Flanged Cap Screw
2
#10-32 x 3/4 Truss Head Machine Screw
1
#10-32 Flanged Nylon Lock Nut
1
Fender Bolt and Nut
1
Note: Right rear corner filler will not fit with the optional rear
remote hydraulics installed without modification. See the install
manual for the 1KTLBM62HYD kit.
7.3 Fasten the right rear corner filler to the vehicle (see
Figures 7.3a and 7.3b, right wheel hidden for clarity).
Tighten the two 1/4-20 screws and leave the remaining
hardware loose.
Note: if auxiliary rear hydraulics will be installed, remove
the plate bolted to the top of the filler and cut the rubber
bulb seal so that the hoses will pass through the opening
in the panel.
Hardware Used
QTY
1/4-20 x 3/4 Hex Head Flanged Cap Screw
2
1/4-20 x 5/8 Hex Head Flanged Cap Screw
1
1/4-20 Flanged Nylon Lock Nut
1
Fender Bolt and Nut
1
Figure 7.1: Left Rear Corner Filler
Figure 7.2: Left Rear Corner Filler
Figure 7.3b: Right Rear Corner Filler
Figure 7.3a: Right Rear Corner Filler
Fender Bolt and Nut
#10-32 Screw and Nut
1/4-20 Screw
1/4-20 Screw
Fender Bolt
and Nut
1/4-20 x 5/8 Screw
and Nut
1/4-20 x 3/4
Screw
1/4-20 x 3/4
Screw
INSTALLATION
