26 of 37
Door Removal and Installation:
- Open the door to its widest extent allowed by the gas shock. Press the orange button on the end of the
gas shock attached to the frame to remove that end from the ball stud.
- Lift the door from the pins on the rear leg of the side frame.
- Remove and retain the brass washers from the pins (one washer per pin).
- To install: Apply grease (not supplied) to the pins, install one (1) brass washer onto each pin and drop
the door onto the pins. NOTE: one hinge pin is longer to aid in installation.
- Doors can be adjusted for better fit/operation using the bolts for the hinges, striker bolt up down and
the door latch forward/back.
Side Window Removal and Installation:
- Open the Pop-out Latch on the rear window.
- Press the two buttons on the latch arm to release the latch from the side frame.
- Standing at the left of the tractor/cab and firmly holding the rear window, swing the rear window to the
left and lift the window off of the pins.
- To install: Apply grease (not supplied) to the pins, install one (1) brass washer onto each pin and drop
the rear window onto the pins. Insert the pins from the Pop-out Latch arm into the mount on the rear
panel and ensure that both pins are extended into the mount.
OPERATION
