![background image](http://html1.mh-extra.com/html/curtis/kubota-m62-tlb/kubota-m62-tlb_installation-and-owners-manual_2699754019.webp)
19 of 37
STEP 16: Rear Panel Windows
Note: if installing with the optional rear remote hydraulics, the
small lower right window will not be installed. See install
manual provided with 1KTLBM62HYD for more details.
16.1 Attach each of the three rear windows to the rear panel in
the same manner as the windshield (see Figure 16.1).
Use the 1-1/2” screws in the four corners where indicated
by the “A”
Hardware Used
QTY
1/4-20 x 1-1/2 Hex Head Flanged Cap Screw 4
1/4-20 x 1-1/4 Hex Head Flanged Cap Screw 8
1/4
Fender
Washer
12
1/4-20 Flanged Nylon Lock Nut
12
STEP 17: Doors and Windows
17.1 Apply grease to each of the four pins on each side frame
(a total of eight pins). Ensure that each pin has one brass
washer installed.
17.2 Hang each rear window onto the rear pins on each side
frame and connect the latch at the front of each window.
17.3 Hang each door onto the forward pins on each side frame.
Open the door to slightly and attach a gas shock onto the
ball studs on the door and frame, with the quick-release
end on the frame. (See Figures 17.3a and 17.3b)
Figure 16.1: Rear Panel Windows
Figure 17.3a: Right Door
Figure 17.3b: Left Door
INSTALLATION
A
A
A
A