8 of 37
STEP 2: Cowl Assembly
2.1 Slide cowl over vehicle dash board (see Figure 2.1).
2.2 Fasten the bottom cowl flanges to the vehicle floor board
(see Figure 2.2). Repeat on opposite side. Leave bolts
loose.
Hardware Used
QTY
5/16-18 x 3/4 Hex Head Flanged Cap Screw
2
5/16-18 Flanged Nylon Lock Nut
2
STEP 3: Windshield Support
3.1 Assemble the rear view mirror to the windshield support
(see Figure 3.1).
Hardware Used
QTY
#10-32 x 1/2 Pan Head Machine Screw
2
#10-32 Flanged Nylon Lock Nut
2
3.2 Remove and retain the rear M12 nut, lock washer, and flat
washer from the upper front ROPS, just under the canopy
(see Figure 3.2, canopy hidden for clarity). Push the end of
the bolt flush with the OEM side frame bracket, but do not
remove. Repeat for the other side.
3.3 With assistance, place the windshield support against the
ROPS per Figure 3.2 and align the hole in the bracket on
each side to the M12 ROPS bolt. Push the bolt through the
bracket and secure with the flat washer, lock washer, and
M12 nut removed in step 3.2. Leave loose.
Figure 2.1: Slide On Cowl
Figure 2.2: Fasten Cowl to Floor Board
Figure 3.1: Assemble Mirror to Windshield Support
Figure 3.2: Fasten Windshield Support
INSTALLATION
