![background image](http://html1.mh-extra.com/html/curtis/1297/1297_manual_2699565091.webp)
Curtis PMC 1297 Manual
83
Preliminary on Verso page is set with right edge at 7 and 7/8,
and the top (as on the Recto page) at 1/4.
6 — PROGRAMMER MENUS: Diagnostics Menu
1297 DIAGNOSTICS AND DIAGNOSTIC HISTORY
This is a list of the possible messages you may see displayed when the program-
mer is operating in either of the Diagnostics modes. The messages are listed here
in alphabetical order for easy reference.
ANALOG MUX FAULT
Multiplexer communications interrupted
ANTI-TIEDOWN
Mode switch closed (M2) at startup
BDI LOW
Battery state of charge <20%
DRIVE M-
Traction motor terminal shorted to B- or open
DRIVE SENSOR
Traction motor current sensor error
EMR REV WIRING
Emergency reverse wiring fault
FIELD OPEN
Traction motor field winding open
FIELD SHORT
Traction motor field overcurrent
HPD
HPD fault occurred
HW FAILSAFE
Hardware failsafe activated
HYD INHIBIT
Hydraulic throttle high at interlock
HYD THROTTLE FAULT
Hydraulic throttle fault
LOW BATTERY VOLTAGE
Battery voltage too low
MAIN CONT WELDED
Main contactor welded
MISSING CONTACTOR
Main contactor missing
NO KNOWN FAULTS
No known faults
OVER TEMP CUTBACK
Cutback due to internal temp >85
°
C
OVERVOLTAGE
Battery voltage too high
PUMP DISABLED
Pump motor disable timer expired
PUMP M-
Pump motor terminal shorted to B- or open
PUMP SENSOR
Pump motor current sensor error
SERVICE PUMP
Pump motor service timer expired
SERVICE TOTAL
Total service timer expired
SERVICE TRAC
Traction motor service timer expired
SRO
SRO fault occurred
THROTTLE WIPER HI
Traction throttle wiring fault (high)
THROTTLE WIPER LO
Traction throttle wiring fault (low)
TOTAL DISABLED
Total disable timer expired
TRAC DISABLED
Traction motor disable timer expired
UNDER TEMP CUTBACK
Cutback due to internal temp <-25
°
C
VALVE FAULT
Lowering valve fault