Cumberland 074-11772, Owner'S Manual

Page: 13 / 102

Chapter 1: Introduction
Guidelines on the ideal location for installation
• To avoid exposing the system to harmful gases or excessive dust, install the EDGE Bin Scale far to
the silos openings.
• The temperature should not go lower than -40 °F (-40 °C) and should not exceed 104 °F (40 °C).
• Avoid installing in direct sunlight if possible.
• Ensure there is sufficient ventilation around the unit.
• Install the EDGE Bin Scale far from sources of vibrations and where they are not likely to get
bumped.
IMPORTANT: If you are not planning on installing the system immediately, store the units in a cool dry
place.
Clearance around the Bin Scale module
The following minimum clearances must be respected around the Bin Scale module.
Figure 1-2 Minimum clearance
891–00577 EDGE Bin Scale 3 Wires LC 13