Cumberland 074-11772, Owner'S Manual

Page: 49 / 102

Chapter 6: Setup
Setting an Out of Feed Alarm
An Out of feed alarm can be associated with a single Bulk feed tank or a Tank group . Both are configured
the same way.
What You Should Know
An Out of feed alarm can be set up to trigger:
• an alarm in the alarm page,
• the EDGE Controler main alarm relay,
• a specific alarm relay.
When used, an Out of feed alarm is triggered for a tank or a tank group when the feed weight drops
below the Out of feed alarm threshold . It will recover when feed is added to the tank or when doing a
Tare weight calibration .
To set an Out of Feed Alarm: (See )
1. Press the Setup icon on the EDGE Controller .
2. Select Outside from the Room/Barn menu.
3. Press Bulk feed tank .
4. Select Alarms .
5. Select the desired Bulk Feed Tank or Tank group .
6. Set the parameters the following parameters:
Parameter Description
Use out of feed alarm Check to turn ON or uncheck to turn OFF the out of feed alarm.
Out of feed alarm threshold Set the feed weight below which the Out of feed alarm will be
triggered.
Main alarm relay Check if you want the EDGE Controller Main alarm relay to be
triggered by an Out of feed alarm .
See the Main alarm relay section in the EDGE Controller manual
for more information.
Alarm relay A specific alarm relay may be triggered by the Out of feed alarm .
See the Alarm relay section in the EDGE Controller manual for
more information.
NOTE: The Out of feed alarm can be sent to predefined users. See how to setup this feature in the
User management section of the EDGE Controller manual.
891–00577 EDGE Bin Scale 3 Wires LC 49