CU-ERT Operator’s Manual_ver 1.10
24
Infrared Remote Controller Functions
Key Function
POWER OFF
Turns the power of the Paramedic CU-ERT when pressed while the Paramedic
CU-ERT is ON.
PAD ON/OFF
Simulates pads ON and pads OFF conditions. Toggles between the said two
conditions when pressed (i.e. if the pads are ON, turns OFF the pads when
pressed; if the pads are OFF, turns ON the pads when pressed).
LOW BAT
Simulates a low battery condition when pressed.
NSR
80/120/240
Simulates the acquisition and display of a normal sinus rhythm ECG. Default
rate is 80 bpm. The rate is cycled through the 80/120/240 bpm loop when the
key is pressed repeatedly.
VF
Simulates the acquisition and display of a ventricular fibrillation ECG rhythm.
VT
180/240
Simulates the acquisition and display of a ventricular tachycardia ECG rhythm.
The rate is cycled through the 1800/240 bpm loop when the key is pressed
repeatedly.
ASYS
Simulates the acquisition and display of an asystole ECG rhythm.
CS1
Customer defined rescue scenario. Not implemented on this version of
Paramedic CU-ERT.
CS2
Customer defined rescue scenario. Not implemented on this version of
Paramedic CU
CS3
Customer defined rescue scenario. Not implemented on this version of
Paramedic CU
S1 to S10
Rescue scenarios 1 to 10. The rescue scenarios simulate rescue conditions in
the field. The trainee may react to the scenarios by doing the appropriate
actions.
