CU-ERT Operator’s Manual_ver 1.10
44
8.2 Data Review
8.2.1 Internal Flash Memory
Data from the latest rescue operation is stored in the internal flash memory of the
Paramedic CU-
ERT
if the SmartMedia Card is not present in its port. The data stored in the internal flash memory
can be displayed and reviewed on the LCD screen of the device.
To review the stored data, perform the following steps:
a.
Turn the Paramedic CU-ERT ON without inserting the SmartMedia Card and without connecting
any ECG/Defibrillation pads connector assembly to the ECG-DEFIB port.
b.
Activate the menu by pressing the MENU button and go to REVIEW INCIDENT-USAGE REVIEW or
REVIEW INCIDENT-ECG REVIEW.
8.2.2 SmartMedia Card
Data from the latest rescue operation is stored in the SmartMedia flash memory card if it is installed in
its port before the Paramedic CU-ERT is turned ON.
8.2.2.1 Installation of a SmartMedia Card
a)
Ensure that the SmartMedia Card is clean and dry.
b)
Turn the
Paramedic CU-ERT
OFF.
c)
Load the SmartMedia Card with the metallic strip facing down and the notched end going in first.
Push the card all the way in until the card hits a stop. The SmartMedia Card is ready to record
data when the
Paramedic CU-ERT
is turned on for use.
d)
When the device is turned on with the SmartMedia Card inserted, the SmartMedia card data
recording symbol is displayed on the bottom right side of the LCD display.
is displayed when the Voice Recording option is ON.
is displayed when the Voice Recording option is OFF
e) Only SmartMedia Cards supplied by the manufacturer are compatible with the Paramedic CU-ERT.
Do not use any other kind of flash memory card.
8.2.2.2 Removal of a SmartMedia Card
a)
Turn the
Paramedic CU-ERT
OFF
b)
Pull out the SmartMedia Card from the SmartMedia Card port.
Make sure that the SmartMedia Card is loaded before turning ON the device.
Do not pull out the SmartMedia Card before turning OFF the device. Loading or
pulling out the SmartMedia Card while the power is ON will cause data error
and may damage the SmartMedia card