CU-ERT Operator’s Manual_ver 1.10
20
Initial Screen
After a second or two, the Splash Screen is replaced by the Initial Screen shown in the following figure.
Flashing Arrows
Point to the location where the pads should be placed
Battery Status Icon
When the External
Battery Pack
(LiMnO
2
) is on Use
Shows the power level of the external battery pack of the Paramedic CU-
ERT. It also indicates when the Paramedic CU-ERT is powered by an AC
adapter or a Car cigar lighter jack.
Battery level > 90% of full level.
90% > Battery level > 40% of full level.
40% > Battery level > 10% of full level.
Battery level < 10% of full level. At this level, the device can
still deliver ten 150J shocks. When this is displayed, the
battery pack should be replaced. Do not wait for the battery
pack to be drained below the level where the Paramedic CU-
ERT could not operate anymore.
Battery Status Icon
When the AC/DC
Adapter is on Use
the device is powered by an AC adapter or a Car cigar lighter
jack
Prompt
Displays the action that needs to be done by the operator
Elapsed Time
The time that elapsed since the Paramedic CU-ER2 was turned ON
SmartMedia Card
Indicator
This icon is displayed when the SmartMedia Card is inserted in its port
before the Paramedic CU-ERT is turned ON
Current Date
Displays the present date.
CPR Ratio
Displays the status of setting for CPR Ratio (30:2, 15:2)
Flashing
arrows
Battery Status
Icon
SmartMedia
Card Indicator
Elapsed Time
Prompt
Current
Date
CPR Ratio
