CU-ERT Operator’s Manual_ver 1.10
47
Push the MENU button. The data transmission screen will be displayed
L
#
©
'
DATA TRANSMISSION
PRESS THE MENU KEY TO RETURN
'
When the Paramedic CU-ERT is communicating, the Communication icon will show moving arrow tips.
The Connection icon will show the status of the connection of the Paramedic CU-ERT with the PC
during data transmission
- signifies that connection has not been made yet. This is also shown at the end of the
data transfer process.
- signifies that a connection has been established and that communication is ongoing.
When this icon is shown, a progress bar will also be shown underneath the
Paramedic CU-ERT icon.
- signifies that the attempt to make a connection has failed. When this icon is shown,
the Communication icon will also stop moving the arrow tips. Attempts to establish
a connection will be stopped if no connection is made in 1 minute. This icon is also
shown if data transfer is cancelled due to interference
e.
The progress of the data transmission will be tracked by a progress bar in the LCD display of the
Paramedic CU-ERT.
f.
The order of device activation can also be reversed. It is possible to set the Paramedic CU-ERT
first to transmit data and then set the CU Expert to receive data.
g.
When the data transmission is completed, the CU Expert ECG Data Management Software will
prompt the user about the completion of the transmission. The completion of the data
transmission is also shown by a full progress bar in the LCD display of the Paramedic CU-ERT.
h.
When the transmission is finished, the Paramedic CU-ERT may be turned OFF. It is also possible
to do other tasks that are accessible through the menu operation.
Communication icon
Connection icon
