8
The second part (XXX.XXX.8.100 in the example) identifies the device within the
network. Assigning unique device numbers is your responsibility. If you are unsure of
the IP addresses allocated to you, consult the allocation organization from which your
IP addresses were obtained.
Remember that no two devices on a network can have the same address. If you connect to
the outside, you must change all the arbitrary IP addresses to comply with those you have
been allocated by the allocation organization. If you do not do this, your outside
communications will not operate.
A subnet mask is a filtering system for IP addresses. It allows you to further subdivide your
network. You must use the proper subnet mask for proper operation of a network with
subnets defined.
1.3 LED Definitions
LED
Color
Operation
Power
Off
System is power down.
Green
System is power up.
Status
Green
System is working normally.
When the system is set back to default factory
setting, the Status LED indicator will blink three
times.
WAN
Off
Fiber link is down.
Green
Fiber link is up.
Blinking when traffic is present.
LAN1~LAN5
Off
Link is down.
Green
Link is up.
Blinking when traffic is present.
Summary of Contents for HET-2106 SERIES
Page 79: ...79 Restart DHCP service...
