6
1. INTRODUCTION
Thank you for using the 5-Port 10/100TX plus 1-Port 100FX Uplink & 6-Port 10/100Base-TX
Fast Ethernet Smart Switch. The built-in management module allows users to configure this
Smart Switch and monitor the operation status locally or remotely through network.
The Smart Switch is fully compliant with IEEE 802.3 and 802.3u standards. By employing
store and forward switching mechanism, the Smart Switch provides low latency and faster
data transmission. Moreover, it also supports more advanced functions such as QoS, Q-in-Q
VLAN Tunneling, Rate Limiting, IGMP Snooping, etc. Users can configure the required
settings of the Smart Switch and monitor its real-time operational status via Command Line
Interface and Web Management. For detailed description on both management methods,
please refer to Section 2 and 3 respectively.
1.1 Interfaces
The Smart Switch Series provides two models with different interfaces. Depending on your
networking requirements, you can select the most suitable one to apply in your networking
environment. Figure 1 below displays the interface with five 10/100 LAN ports; whereas,
Figure 2 shows one WAN TP and five 10/100 LAN ports.
Figure 1. 5 10/100 LAN Ports
Figure 2. 1 WAN TP Port & 5 10/100 LAN Ports
Both models have the same top panel that displays LED indicators for each LAN connection
and link status.
Figure 3. Top Panel with LED Indicators
Summary of Contents for HET-2106 SERIES
Page 79: ...79 Restart DHCP service...
