42
server is also available on the network, the Smart Switch will automatically get the IP
address from the DHCP server. If "
Manual"
is selected,
users need to specify the IP
address, Subnet Mask and Gateway.
NOTE:
This Smart Switch supports auto-provisioning function that enables DHCP clients
to automatically download the latest Firmware and configuration image from the server.
For information about how to set up a DHCP server, please refer to
APPENDIX A
.
IP Address:
Enter the unique IP address for this Smart Switch. You can use the default IP
address or specify a new one when the situation of address duplication occurs or the
address does not match up with your network. (The default factory setting is 192.168.0.1.)
Subnet Mask:
Specify the subnet mask. The default subnet mask values for the three
Internet address classes are as follows:
Class A: 255.0.0.0
Class B: 255.255.0.0
Class C: 255.255.255.0
Gateway:
Specify the IP address of a gateway or a router, which is responsible for the
delivery of the IP packets sent by the Smart Switch. This address is required when the
Smart Switch and the network management station are on different networks or subnets.
The default value of this parameter is 0.0.0.0, which means no gateway exists and the
network management station and Smart Switch are on the same network.
Current State:
These View-only fields show manually assigned IP address, Subnet Mask
and Gateway of the Smart Switch.
3.3.2 Device Community
Click the option
Device Community
from the
Network Management
menu and then the
following screen page appears.
Click
New
to add a new SNMP community name list and then the following screen page
appears.
Click
Edit
to view the current community settings.
Click
Delete
to remove a registered community.
Summary of Contents for HET-2106 SERIES
Page 79: ...79 Restart DHCP service...
