18
2. Display or verify currently-configured settings
Refer to “Interface command”, “IP command”, “MAC command”, “QoS command”, “Security
command”, “SNMP-Server command”, “User command”, “VLAN command” sections.
3. Display interface information or statistics
Refer to “Show interface statistics command” and “Show sfp information command” sections.
2.5.4 Interface command
Use this command to set up various port configurations of discontinuous or a range of ports.
Command
Parameter Description
Switch(config)# interface
[port_list]
[port_list]
Enter several port numbers separating by
a comma or a range of port numbers.
For example: 1,3 or 2-4
Switch(config-if)# speed [100 |
10]
[100 | 10]
Set up the selected interfaces‟ speed.
Speed configuration only works when “no
auto-negotiation” command is issued.
Switch(config-if)# auto-
negotiation
Set the selected interfaces‟ to auto-
negotiation. When auto-negotiation is
enabled, speed configuration will be
ignored.
Switch(config-if)# duplex full
Set the selected interfaces‟ to full duplex
mode.
Switch(config-if)# flowcontrol
Enable the selected interfaces‟ flow control
function.
Switch(config-if)# shutdown
Administratively disable the selected ports‟
status.
No command
Switch(config-if)# no auto-negotiation
Set auto-negotiation setting to the default
setting.
Switch(config-if)# no duplex
Set the selected ports‟ duplex mode to the
default setting.
Switch(config-if)# no flowcontrol
Set the selected ports‟ flow control
function to the default setting.
Switch(config-if)# no shutdown
Administratively enable the selected ports‟
status.
Switch(config-if)# no speed
Set the selected ports‟ speed to the default
setting.
Show command
Switch(config)# show interface status
Show each interface‟s port status including
media type, forwarding state, speed,
duplex mode, flow control and link
Summary of Contents for HET-2106 SERIES
Page 79: ...79 Restart DHCP service...
