CTS HET-2106 SERIES, User Manual

Page: 33 / 82

33
port4vlan ,
port5vlan ,
port6vlan
No command
Switch(config)# no vlan dot1q-
vlan
Disable 802.1q VLAN globally.
Switch(config)# no vlan dot1q-
vlan [1-4094] [1-4094]
Delete the specified VID.
Switch(config-if)# no vlan
dot1q-vlan access-vlan Set the selected ports‟ PVID to the default
setting.
Switch(config-if)# no vlan
dot1q-vlan mode
Remove VLAN dot1q mode.
Switch(config-if)# no vlan
dot1q-vlan trunk [1-4094] [1-4094] Remove the selected ports‟ VLAN 100 port
membership. The selected ports are no longer
member ports in VLAN 100.
Switch(config-if)# no vlan port-
based [name] [name] Remove or delete the selected port from the
specified port-based VLAN.
Show command
Switch(config)# show vlan Display global VLAN information including
802.1q VLAN Enable/Disable status and CPU
VLAN ID.
Switch(config)# show vlan
interface [port_list]
[port_list]
Show the specified ports‟ VLAN assignment
and tagging information.
Switch(config)# show vlan dot1q-vlan Show 802.1q VLAN table.
Switch(config)# show vlan port-based Show port-based VLAN table.
Switch(config)# show vlan interface
Show each interface‟s VLAN assignment and
tagging information.
VLAN dot1q & interface example
Switch(config)# vlan dot1q-vlan Enable 802.1q VLAN globally.
Switch(config)# vlan dot1q-vlan 100 Create a new VLAN 100.
Switch(config)# vlan management-vlan 1
management-port 1-3
Set port 1~3 to management ports.
Switch(config)# interface 1-3 Enter port 1 to port3‟s interface mode.
Switch(config-if)# vlan dot1q-vlan trunk-vlan
100
Assign the selected ports to VLAN 100.
Switch(config-if)# vlan dot1q-vlan mode
access Set the selected ports to access mode
(untagged).
Switch(config-if)# vlan dot1q-vlan access-vlan
100
Set the selected ports‟ PVID to 100.