CTM 360a series, Maintenance And Service Manual

Page: 8 / 176

INTRODUCTION
1-2
READ THE INSTRUCTIONS IN ORDER. The instructions are written as numbered steps that will take
you safely and efficiently through the setup process. Any steps performed out of sequence may result in a
hazard and the Applicator may not operate properly.
WORK CAREFULLY. Although setting up the Applicator is not difficult, it does take time. Do not rush
through the process. Careful work will produce good results.
IF SOMETHING DOES NOT WORK PROPERLY, TRY SETTING IT UP AGAIN. Although an
Applicator malfunction is possible, most problems happen because the Applicator is not setup correctly. If
the Applicator doesn’t operate correctly, back up and start over.
FOLLOW ALL SAFETY INSTRUCTIONS. The CTM 360a Series MLS applicator has been provided
with a number of safety features. Observe all safety warnings and under no circumstances attempt to
remove or defeat safeguards or operate the Applicator in a manner contrary to the instructions.