CTM 360a series, Maintenance And Service Manual

Page: 21 / 176

360a DISPLAY
3-9
LABEL SETUP (cont’d)
Viewing/Loading a Format
When the operator wants to view/load a Format File, they need to press the yellow portion of the key
associated with the desired Format name. If the number is “0000”, no Format is saved in that location.
Selecting a “0000” Format will cause a screen
to appear with a “No File Found” message.
Pressing the View/Load Key will not
immediately load the Format but will allow the
operator to view the values within that Format.
After reviewing the values, the operator may
press “Load Format” to load the Format. If the
wrong format was selected, the operator can
press the “Exit W/Out Changing” key.
Deleting a Format
When the operator wants to delete a Format
that currently exists, press the Erase Format
Key in the upper right hand corner of the
Display. The screen to the right will appear.
Pressing any of the boxes with a name will
cause that Format to be erased.
Note: There is no second step to this
operation. Once you press the format box,
the Format will be erased.