CTM 360a series, Maintenance And Service Manual

Page: 16 / 176

360a DISPLAY
3-4
PASSWORD
The Setup Section of the Display is password
protected. The Standard 360a password is “1800”.
When you get to a password-protected area, a screen
similar to the one to the left will appear.
This screen notifies the operator that the area is
password protected. Here the operator can choose
to go back to the Main Menu or continue with
password entry by touching within the box to the
left to activate the keypad
When you touch a number on the keypad, it will
highlight. This is the only indication that a key
was pressed since the password is not displayed.
If you know you’ve entered a wrong number,
press “C” to clear what you have and start again.
“ENTER” finishes the process.
If the wrong password was entered, the screen above
appears. If the operator wants to try again, press the
“Try Again” key. If you do not know the password,
press the other key to go to the Main Menu.