CTC Parker Automation PowerStation P1, User Manual, Page: 50 / 86

Preparing the Location
42
P1 PowerStation User Guide
Preparing the Location
Once you select a location, you can begin preparing the location to accept
the unit. Prior to installing the PowerStation, you will need to create a
cutout for the unit and clean the area of any dirt or debris that may come in
contact with the unit.
Creating the Cutout
The PowerStation comes with a template that is designed to simplify the
task of creating the cutout for the unit. Follow these steps to create the
cutout:
1. Securely attach the template to the mounting surface.
2. Cut out the shaded area on the template referred to as the ‘Panel Cutout
Area.’ To maintain the flatness of the mounting surface, CTC Parker
recommends that you cut out the Panel Cutout Area rather than punch
it out.
3. Debur the edges of the metal cutout.
4. Ensure that the mounting surface has remained flat and that the panel
surface is clean and free of foreign materials.
Preparing to Use an AC Power Supply
When you purchase the optional AC power supply and the AC Power
Supply Mounting Kit for the PowerStation, you receive a template that you
can use to prepare the location for the power supply. Follow these steps to
prepare the power supply mounting surface:
1. Securely attach the template to the mounting surface.
2. Drill and debur four 0.17” (4.3mm) holes.
StockCheck.com