manualshive.com logo in svg

CTC Parker Automation PowerStation P1, User Manual, Page: 38 / 86

Share
Download
CTC Parker Automation PowerStation P1 User Manual Download Page 38

Using the Shell Utility

30

P1 PowerStation User Guide

If you select RUN INTERACT, the PowerStation loads Interact auto-
matically without interaction from the user. When the user exits 
Interact, the Shell MAIN MENU is displayed. This selection is partic-
ularly useful if a power cycle should occur because the unit would 
automatically run Interact when the power is restored.

If you select SHELL MAIN MENU, then the PowerStation loads the 
Shell and displays the Shell MAIN MENU.

DOWNLOAD ENABLE

Use this option to enable or disable the serial ports for downloading 
projects and applications to the unit.

The Shell will not allow you to enable a serial port for downloading that is 
used by a mouse. Likewise, the Shell automatically disables any serial port 
enabled for downloading whenever it detects a mouse connected to it.

Note

It is possible that all the download ports could become disabled by 
multiple changes to the configuration file. If this occurs, then you 
will have to manually enable them using the DOWNLOAD 
ENABLE setting on the SETTINGS menu.

StockCheck.com

Summary of Contents for PowerStation P1























































































Reviews:

No comments