CTC Parker Automation PowerStation P1, User Manual, Page: 43 / 86

Configuring the Ethernet Interface
P1 PowerStation User Guide
35
12. Use the left/right arrow keys to display the VGA#101,640x480,256c
option and press Enter.The calibration screen appears.
13. Complete step 6 above for each corner of the screen.The calibration
utility automatically advances the cursor to each corner.
14. When you are finished, press the Esc key to return to the calibration
main menu.
15. Use the up/down arrow keys to highlight the words ‘Save & Exit.’
16. Press the Enter key to save the calibration settings and return to the
Shell MAIN MENU. The calibration utility saves the calibration set-
tings in a file called ATSMOUSE.INI.
Configuring the Ethernet Interface
The \NET directory of the PowerStation’s flash disk contains a configura-
tion utility and all drivers necessary to configure the Ethernet interface on
the PowerStation. A list of these files appears below:
File Name Description
RSET8019.EXE A configuration utility you can use to change the in-
terrupt and address of the Ethernet interface.
NET.BAT A sample batch file you can use to run NetBIOS.
NET.CFG Stores the interrupts and memory for the network
drivers. The default PowerStation configuration re-
serves the following interrupts and I/O addresses.
You cannot use these for the Ethernet interface.
• COM1: Int 4, I/O 3F8
• COM2: Int 3, I/O 2F8
• Touch Screen: Int 12
CTC recommends that you use the following inter-
rupt and I/O address setting for the Ethernet inter-
face: Int 10, I/O 280H. The I/O address block size
required for the interface is 20H.
NETX.EXE The Novell Netware shell program that makes the fi-
nal connection with the server.
*LSL.COM A Novell driver that enables the workstation to com-
municate with different protocols.
StockCheck.com