CTC Parker Automation PowerStation P1, User Manual, Page: 30 / 86

Specifications
22
P1 PowerStation User Guide
Environmental Specifications
The P1 PowerStation conforms to the environmental specifications listed
in the table below:
Important Limit the PowerStation’s exposure to adverse conditions such as
dust, oil, moisture, and corrosive vapors to minimize maintenance
and repair costs.
Remember that the temperature outside the protective enclosure is
generally lower than the internal temperature. Thus, if the PowerSta-
tion is operating inside an enclosure at temperature levels above the
maximum ambient temperature, you will need to cool the enclosure.
Faceplate Chemical Resistance
The faceplate of the PowerStation can resist the chemicals listed in the
table below with no visible effect.
Category Specifications
Operating Tempera-
ture:
32 to 113
o
F (0 to 45
o
C) ambient (air temp. at
case)
Storage Temperature:
-4 to 140
o
F (-20 to 60
o
C)
Relative Humidity: 0% to 95% non-condensing
Shock Rating: • 10g peak; 11ms (operating)
• 30g peak; 30ms (non-operating)
Operating Vibration: • 10 to 18 Hz: 1.5mm
• 18 to 500 Hz: 1.0g
Faceplate Rating: NEMA 4/4X (IP65 European Standard) Envi-
ronment
Faceplate Chemical Resistance
Acetone Sulfuric Acid 10% Motor Oil
MEK Hydrochloric Acid 10% Gasoline
Toluene Acetic Acid 10% Machine Oil
Methylene Chloride Phosphoric Acid Salad Oil
Isopropyl Alcohol Sodium Hydroxide 10% Silicone
Xylene Carbon Tetrachloride Silicone Grease G31
Hexane Potassium Hydroxide Kerosene
Butyl Cellosolve Ammonia Water 10% Gas Oil
StockCheck.com