INSTRUCTION MANUAL Digital Light Engraver
2
Safety
Effective date
30.09.2013
The machine and equipment shall only be operated with correctly installed
safety devices.
We would like to explicitly point out that no safety devices should be re-
moved or disabled while the machine and equipment are in operation.
When maintenance work and cleaning as well as maintenance and repair
services are being performed, the machine and equipment shall be se-
cured in such a way as to preclude unauthorized or inadvertent switching
on of the machine and equipment.
When the maintenance and repair work as well as service work for over-
hauling and carrying out repairs are complete, all safety systems shall be
fully reinstalled and made operative again. An expert should check the
systems to make sure they function correctly.
When a member of staff recognises that there exists the immediate risk of
danger to people at the machine and equipment, the EMERGENCY
STOP device on the machine and equipment must be activated immedi-
ately.
In such cases of damage that would cause an immediate shutdown of the
machine and equipment, an EMERGENCY STOP device on the machine
and equipment can also be activated or automatically triggered.
The EMERGENCY STOP device should never be used to shut down the
machine and equipment under normal working conditions.
Special attention must be given to mounting and removing screen frames
and screens on the machine and equipment as it has to be carried out
carefully.
If work is carried out in an inattentive or careless manner, there exists the
hazard of limbs, items of clothing and objects being crushed, impacted
and sheared, which is due to moving parts. Therefore, particular attention
needs to be paid to the following points:
•
Do not reach into the open gaps between the screen frame and bridge
•
Extreme caution is needed when the bridge is in motion
•
Apart from exceptional cases, screen frames are only to be inserted when
the machine and equipment are not in operation
•
Tight fitting safety clothing and gloves should be worn
•
Please exercise caution with lighting units and motors as they can be-
come very hot! Do not touch the lighting units and motors with exposed
limbs. Depending on the temperature of the lighting units, being in close
proximity to the lighting units can lead to burns
•
Do not change the specific purpose of the machine
•
During the manufacture of this product, the safety devices were specially
designed to work with this machine
•
Please consult CST GmbH if you intend to change the intended use of the
machine
•
Please make sure that the operators are familiar with the operation of the
machine and equipment
CST GmbH
Königsberger Straße 117
47809 Krefeld - Germany
Page 8 of 69
Betriebsanleitung DLE-AF 01.0 engl.docx
