INSTRUCTION MANUAL Digital Light Engraver
6
Operation and Cleaning
Effective date
30.09.2013
•
Entering the X and Y values for the start position. The start position will de-
pend upon the imaging area that has been chosen.
•
Enter the speed values in cm/sec.
The speed is based on the particular screen being used (yel-
low/white/150/90...), the type of emulsion as well as the coating thickness.
The maximum speed (5 to 55cm/sec) also depends upon the chip frequency
in combination with the exposure head resolution.
•
Enter the values for the imaging rows. The values entered here specify how
many rows will be imaged by the chip. In the example below, the chip will
cover 640 rows. The maximum number of rows is stored in the DLE settings.
To reduce the imaging intensity, you need to reduce the number of rows.
CST recommends doing this gradually using increments of 50 in relation to
the final value (140-730/140 – 680...).
•
Setting the slider to a value between Speed/Quality
CST GmbH
Königsberger Straße 117
47809 Krefeld - Germany
Page 39 of 69
Betriebsanleitung DLE-AF 01.0 engl.docx
