INSTRUCTION MANUAL Digital Light Engraver
6
Operation and Cleaning
Effective date
30.09.2013
•
In the next window you will see a list of the different test options that are
available. Click on the term “
Triangulation“
. Select this and confirm the se-
lection by clicking on the “Start” button.
•
The "triangulation" test window will now open. To activate the triangulation
system, press the “Init TRIA" button.
If you get an error message, please check if the hardware is connected to
the correct COM port on the PC.
We strongly
recommend
not changing
any parame-
ters apart
from those
that are de-
scribed in
this manual.
This could
lead to a
machine fail-
ure.
CST GmbH
Königsberger Straße 117
47809 Krefeld - Germany
Page 50 of 69
Betriebsanleitung DLE-AF 01.0 engl.docx