CST DLE Instruction Manual Download

Page: 36 / 69

INSTRUCTION MANUAL Digital Light Engraver

Operation and Cleaning

Effective date

30.09.2013

Danger

Increased risk of accidents can occur as a result of intense/high levels
of ultraviolet radiation!

When monitoring/checking the ultraviolet light, there is always the risk of se-
rious eye injuries and permanent eye damage.

•

Wear appropriate protective equipment in the form of safety glasses that

are suitable for the particular light source.

•

Never look directly at the ultraviolet beam or the image of the pattern on

the screen without personal protective equipment (safety glasses).

Danger

Increased risk of accidents can occur as a result of hazardous voltage!

If there is a fault with an electrical component or cable, the direct or indirect
contact with live parts could result in serious or fatal in-jury through electric
shock!

•

Replace faulty electrical cable and components immediately.

•

Do not touch any components or cables that may be electrically live.

Information

Improper operation could lead to damage to the machine and equip-
ment!

Improper operation can lead to serious damage to the machine and equip-
ment.

•

Make sure that all operations are carried out by qualified, authorized and

trained personnel.

•

Follow the instructions given in the manufacturer’s instruction manual

carefully and comply with them accordingly.

•

Make sure that the workplace is clean when the machine and equipment

are in operation.

•

Do not place any tools, appliances or the like on the machine and equip-

ment.

•

Carefully insert the imaged screen stencil into the machine.

•

Do not operate the machine and equipment without having prior adequate

training or without first reading the manufacturer’s instruction manual.

•

Do not climb on or through the machine and equipment.

CST GmbH
Königsberger Straße 117
47809 Krefeld - Germany

Page 36 of 69

Betriebsanleitung DLE-AF 01.0 engl.docx

Summary of Contents for DLE






































































Search results

Summary of Contents for DLE

Reviews:

Related manuals for DLE

Brands by name

Popular brands

CST DLE, Instruction Manual

Search results

Summary of Contents for DLE

Reviews:

Related manuals for DLE

Brands by name

Popular brands