INSTRUCTION MANUAL Digital Light Engraver
1
General Information
Effective date
30.09.2013
1.
General Information
This instruction manual provides a wealth of safety and operating instructions
for the following product:
Vertical Digital Light Engraver (DLE)
1.1
Notes about the Technical Annex
The
Technical Annex
is an integral part of this instruction manual and in-
cludes all important technical details agreed upon between the purchaser
and the manufacturer, including, for example:
•
Project technical drawings/data sheets
•
Spare parts list for parts subject to wear
•
Relevant operating instructions
•
Information pertaining to the necessary certification
•
Miscellaneous
Apart from the basic model, we also offer optional extras and a variety of
configurations.
Options include:
•
A semi-automatic unloading system for the machine in cooperation with
other vendors
•
A fully automatic loading and unloading system in cooperation with other
vendors
•
Customer-specific adaptation.
This instruction manual contains important information that needs to be taken
into account in all stages of the life cycle of the machine, including the trans-
portation, installation, operation, maintenance and disposal.
Therefore, it is imperative that this instruction manual is read by the installa-
tion engineer and the responsible technical personnel/operator prior to instal-
lation and commissioning and must always be stored at the operating loca-
tion of the machine.
Information pertaining to
specific
hazards to persons, property or the envi-
ronment is highlighted in the relevant chapters of this instruction manual.
Apart from this instruction manual, it is important to take into account the rel-
evant technical documentation provided by the vendors. This contains the
operational safety instructions which have to be observed.
CST GmbH
Königsberger Straße 117
47809 Krefeld - Germany
Page 4 of 69
Betriebsanleitung DLE-AF 01.0 engl.docx
