33
5.
While holding the pod holder assembly in one hand, locate the opening in the exit needle (Fig. 9) and insert the
straightened paper clip into the hole and gently spin or rock the paperclip to remove any grounds which might be
sticking to the needle (Fig 9).
6.
Reassemble the Rear Housing and the Pod Holder Assembly into the brewer module and close the lid.
7.
Place a 12 oz or larger container on the cup holder and run a cycle through the machine without inserting a coffee pod
into the pod holder. This will help to flush the loosened coffee grounds from the system. Repeat as necessary.
Fig. 9