13
6.
Install Spike Cap through the bottle cap (do not remove bottle cap) and press down to secure (Fig. 16 & 17)
7.
Insert the Bottle adaptor assembly through Spike cap until tube hits bottom of the bottle (Fig. 18 & 19).
8.
Slide bottle into cabinet and close the door (Fig. 20 to Fig. 22). Push door down to close.
9.
Place a container under faucet and dispense cold water until a smooth stream of water is dispensed. This may
take up to 1 minute.
Fig. 16
Fig. 17
Fig. 18
Fig. 20
Fig. 21
Fig. 22
Fig. 19