29
13.
Install a new SmartFlo
™
Water Cartridge. Install the connector and corrugated tube into the inlet through cooler to bottom
(Fig. 30 & 31). Insert the reservoir into evaporator (Fig. 32). Ensure the SmartFlo
™
is installed properly. Turn the two knobs
to lock the SmartFlo
™
in place (Fig. 33 & 34).
14.
Slide a clean pod holder onto the tabs on the side of the probe assembly and push downward into place (Fig. 35). Turn the
two red twist locks to lock into place (Fig. 36). Place a clean cup holder (brown) in the pod holder (Fig. 37) and push down
to close the pod holder lid (Fig. 38).
15.
Close and lock the latch arm (Fig. 39).
Fig. 30
Fig. 31
Fig. 32
Fig. 33
Fig. 34
Fig. 35
Fig. 36
Fig. 37
Fig. 38
Fig. 39