19
Note:
The Cold Control can be adjusted without the removal of any panel. The adjustment screw is on the top rear (when viewed
from the rear, see Fig. 1).
To make the water colder, rotate the screw in the clockwise direction approximately 1 hour position. Allow the cooler to
stabilize for 2
-
3 hours to ensure proper temperature of the cold water.
(Note: do not change the setting by more than 1 hour
setting at a time to prevent freezing).
To make the water warmer, rotate the screw in the counterclockwise direction approximately 1 hour position. Allow the
cooler to stabilize for 2
-
3 hours to ensure the proper temperature of the cold water.
Fig. 1
Cold Control Adjustment