11
6.
Remove the red protective cap from the blue tube of the SmartFlo and install onto the bottle adapter assembly
(Fig. 7).
7.
Slide bottle into cabinet (Fig. 8) and close the door. Push down to close.
8.
Depress the cold lever to fill the cold water tank (Fig. 9). When water begins to flow in a steady stream from the cold faucet,
the tank has been filled (approximately 1 minute although it may be less time). Repeat the process with the hot lever until the
flow out of the hot faucet is a steady stream. Lift the door to the bottle area and turn on the hot tank switch (Fig. 10) and
close the door by lowering back into place.
Fig. 7
Fig. 8
Fig. 10
Fig. 9