Crow PowerWave-4, Installation And Programming Manual

Page: 48 / 64

Page 48
PW-4 PROGRAM SUMMARY GUIDE
The following program summary is an abbreviated version of all the PW-4 program addresses. This is intended as a
quick guide to finding a program address. The program addresses are in numerical order with page references
beside them so you can get more detailed information if required.
Because this section is in numerical order, any
addresses relating to the Dialer are not necessarily grouped together. To identify Dialer options each
heading relating to the Dialer are highlighted by an “**” either side of the heading.
Programming User Codes
P1E User Code # 1 -
Default = 123 (If erased by mistake the code will default to 987654) Page 13
P2E User Code # 2 Page 13
P3E User Code # 3 Page 13
P4E User Code # 4 Page 13
P5E User Code # 5 Page 13
P6E User Code # 6 Page 13
P7E User Code # 7 Page 13
P8E User Code # 8 Page 13
P9E User Code # 9 Page 13
P10E User Code # 10 Page 13
P11E User Code # 11 - Installer Code ( Default = 000000) Page 13
User Code Options
P21E User Options Code # 1 (Default 1-8) P21E-P30E Options
Page 14
P22E User Options Code # 2 (Default 1-6) 1 = Assigned to Area “A” Page 14
P23E User Options Code # 3 (Default 1-6) 2 = Assigned to Area “B” Page 14
P24E User Options Code # 4 (Default 1-6) 3 = Code can Arm Area Page 14
P25E User Options Code # 5 (Default 1-6) 4 = Code can Disarm Area Page 14
P26E User Options Code # 6 (Default 1-6) 5 = Code can arm Stay Mode Page 14
P27E User Options Code # 7 (Default 1-6) 6 = Code can disarm Stay Mode Page 14
P28E User Options Code # 8 (Default 1-6) 7 = User can Change their Code Page 14
P29E User Options Code # 9 (Default 1-6) 8 = User can Change Codes 1-10 Page 14
P30E User Options Code # 10 (Default 1-6) Page 14
Programming Output Options “A”
P31E Options for Output # 1 (Default None) P31E-P34E Options
Page 14
P32E Options for Output # 2 (Default None) 1 = Invert Output
P33E Options for Output # 3 (Default None) 2 = Flash Output
P34E Options for Output # 4 (Default 1) 3 = Single Pulse to Output
P35E Options for Output # 5 (Default None) 4 = Lockout Output
P36E Options for Output # 6 (Default None) 5 = Siren Driver to output
P37E Options for Output # 7 (Default None) 6 = “Control” button & DTMF Remote Control can operate O/P
P38E Options for Output # 8 (Default None) 7 = Output Flashes on 24 Hour Alarm
8 = Day zones linked to Pulse Timer (Chime)
Programming Output Options “B”
P41E Options for Output # 1 (Default 1,2,5) P41E-P44E Options
Page 15
P42E Options for Output # 2 (Default 1,2,5) 1 = Pendant Panic to Output
P43E Options for Output # 3 (Default None) 2 = Keypad Panic to Output
P44E Options for Output # 4 (Default None) 3 = Keypad Fire to Output
P45E Options for Output # 5 (Default None) 4 = Keypad Medical to output
P46E Options for Output # 6 (Default None) 5 = System Tamper to Output