FMUX/SAT Multiplexer
© 2006 Cronyx
"SNMP" Menu
"
SNMP
" menu is designed for setting network IP addresses and SNMP protocol param-
eters:
SNMP
Mode: Normal; Sensor=Open
Link: 8448 kbps, Ok, Cable cross V.35
DTR, RTS, ETC, DSR, CTS, CD, RXC
MAC address: 00-09-94-00-01-54
1. IP address/netmask: 144.206.181.188 / 24
2. Gateway IP address: 144.206.181.254
3. Get community: public
4. Get IP address/netmask: 144.206.181.121 / 0
5. Set community: secret
6. Set IP address/netmask: 144.206.181.121 / 0
7. Traps: Enabled
8. Authentication traps: Enabled
9. Trap community: alert
0. Trap destination IP address: 144.206.181.121
Command: _
The following parameters should be set for Ethernet port operation:
• "IP address/netmask: ...” – multiplexer SNMP port IP address and netmask length;
• "Gateway IP address: ...” – router gateway IP address.
The following parameters must be set for management over SNMP protocol:
• "Get community: ...” – password for information request access;
• "Get IP address/netmask: ...” – IP address and netmask length for information request
access restriction;
• "Set community: ...” – password for parameter configuration access;
• "Set IP address/netmask: ...” – IP address and netmask length for parameter configu-
ration access restriction;
• "Traps: ...” – emergency trap sending ("Enabled" or "Disabled");
• "Authentication traps: ...” – unauthorized access trap sending ("Enabled" or "Dis-
abled");
• "Trap community: ...” – password for sending emergency traps;
• "Trap destination IP address: ...” – IP address for sending emergency traps.
Summary of Contents for FMUX/SAT
Page 43: ...2006 Cronyx 43...
