FMUX/SAT Multiplexer
© 2006 Cronyx
• "LOF" – loss of frame synchronization;
• "AIS" – AIS signal is being received;
• "Loop" – local loop enabled on the link: the received signal is turned back;
• "Remote loop" – request for remote loop enabling.
When BER tester is enabled, the "Link" line also shows information about test results:
• "Test pattern not detected" – if the test pattern was not detected in received data;
• "Test error rate=..." – error rate in received data, 10
-1
to 10
-8
(shown in place of "Test
pattern not detected" message);
• "Time total/loss=.../..." – total test time (days hours:minutes:seconds)/time in "Test
pattern not detected" state (seconds);
• "Bit errors=..." – data error counter;
• "Code=..." – test pattern code.
Summary of Contents for FMUX/SAT
Page 43: ...2006 Cronyx 43...
