© 2006 Cronyx
Section 4. Management over Console Port
Section 4. Management over Console Port
The device is managed using ASCII terminal (console). The console may be used to view
current device modes, port states, local and remote error statistics, to select device modes
and save them in non-volatile memory.
4.1. Upper Level Menu
The console interface is designed as simple hierarchical menu. To select command,
you must enter its number. To return to upper level menu, you must press <Enter> (or
<Return>). An example of the main menu is presented in the picture:
Cronyx FMUX / 4E1-SAT-SNMP revision A, 28/04/2006
Mode: Normal; Sensor=Open
Link: 8448 kbps, Ok, Cable cross V.35
DTR, RTS, ETC, DSR, CTS, CD, RXC
1. Link statistics
2. E1 port statistics
3. Event counters
4. Loop...
5. Test...
6. Configure...
7. Login to remote device
0. Reset
Command: _
The upper line represents device model name, revision code and firmware date.
"
Mode
" line shows the "Alarm" state and external input sensor state:
• "Normal" – normal state – or "Alarm" – "alarm" state;
• "Sensor= ..." – state of external input sensor contacts: "Open" or "Closed"; if "Sensor
input: Alarm on open" option is selected in configuration menu, then "Alarm on
open" definition is shown.
For more information see "Alarms" section.
"
Link
" line shows bit rate used (8448, 6336, 4224, or 2112 kbit/s) and link port state:
• "OK" – normal state, frame synchronization present;
• "LOS" – loss of signal in the link;
Summary of Contents for FMUX/SAT
Page 43: ...2006 Cronyx 43...
