Page 30
Feature #18
Doors Lock When Ignition Is Turned On
(Factory Default Setting On)
This feature configures the system to automatically lock the vehicle’s
doors every time that the ignition switch is turned on. An exception to this
would be if feature #21 is turned on, and a door being open when the ignition
switch is turned on. The two following features, #19 and #20, control the
automatic unlocking operation.
Programming Doors Lock When Ignition Is Turned On:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released eighteen times. The system’s response will be eighteen siren
chirps, and the Status Light flashing eighteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter’s Large Upper Button
to turn on “Doors Lock When Ignition Turned On” (the siren will chirp once)
or the Small Lower Button to turn this feature off (the siren will chirp twice).
Feature #19
Doors Unlock When Ignition Is Turned Off
(Factory Default Setting On)
This feature configures the system to automatically unlock the vehicle’s
doors every time that the ignition switch is turned off. An exception to this
would be if feature #21 is turned on, and a door being open when the ignition
switch is turned off.
Programming Doors Unlock When Ignition Is Turned Off:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released nineteen times. The system’s response will be nineteen siren
chirps, and the Status Light flashing nineteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter’s Large Upper Button
to turn on “Doors Unlock When Ignition Is Turned Off” (the siren will chirp
once) or the Small Lower Button to turn this feature off (the siren will chirp
twice).
Feature #20
Is Not Used On The 328i
3
Page 31
Feature #21
Open Door Bypass Of Ignition Locking
(Factory Default Setting On)
This feature cancels the automatic locking or unlocking of the vehicle’s
doors when the ignition switch is turned on or off if one of the doors is open.
This feature can be useful, for example, for leaving others within a locked
vehicle when only the driver exits the vehicle. Features #18 and #19 must
be turned on for this feature to operate.
Programming Open Door Bypass Of Ignition Locking:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released twenty one times. The system’s response will be twenty one
siren chirps, and the Status Light flashing twenty one times, pausing, then
repeating. Within 10 seconds, press and release the transmitter’s Large
Upper Button to turn on “Open Door Bypass Of Ignition Locking” (the siren
will chirp once) or the Small Lower Button to turn this feature off (the siren
will chirp twice).
Feature #22
1 Or 2 Button Transmitter Operation
(Factory Default Setting 1 Button Operation)
This feature changes the configuration of how the transmitter operates
the system. In the factory default setting of “1 Button Operation”, a single
transmitter button alternates Arming and Disarming the system with every
press of the button. When this feature is programmed to the “2 Button
Operation” setting, one of the transmitter’s buttons will only Arm the
system, and a second button will only disarm the system. An optional
transmitter with four buttons, Omega part number #105-05, is available from
your Crime Guard dealer or directly from Omega Research and Develop-
ment. The following pages will show the system’s operation with either type
of transmitter.
Programming Transmitter 1 Or 2 Button Operation:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released twenty two times. The system’s response will be twenty two
siren chirps, and the Status Light flashing twenty two times, pausing, then
repeating. Within 10 seconds, press and release the transmitter’s Large
Upper Button to configure the system for “1 Button Operation” (the siren
will chirp once) or the Small Lower Button to configure the system for “2
Button Operation” (the siren will chirp twice).
