Activated” Vehicle Recovery is one three methods of activating this feature,
which is explained on page 18.
Programming Door Activated Vehicle Recovery:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released thirteen times. The system’s response will be thirteen siren
chirps, and the Status Light flashing thirteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter’s Large Upper Button
to turn on the Door Activated Vehicle Recovery feature (the siren will chirp
once) or the Small Lower Button to turn this feature off (the siren will chirp
twice).
Feature #14
Transmitter Activated Vehicle Recovery
(Factory Default Setting Off)
This form of the Vehicle Recovery feature gives you the option of
activating the Vehicle Recovery operation from the transmitter in the event
that you are forced from your car. “Transmitter Activated” Vehicle Recov-
ery is one three methods of activating this feature, which is explained on page
18.
Programming Transmitter Activated Anti Car-Jacking:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released fourteen times. The system’s response will be fourteen siren
chirps, and the Status Light flashing fourteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter’s Large Upper Button
to turn on the Transmitter Activated Vehicle Recovery feature (the siren will
chirp once) or the Small Lower Button to turn this feature off (the siren will
chirp twice).
Feature #15
Automatic Rearming
(Factory Default Setting On)
This feature prevents your system from being disarmed accidentally,
configuring the system to automatically rearm itself 90 seconds after it has
been Disarmed by the transmitter. The operation of the Automatic Rearming
feature is explained in more detail on pages 10-11.
Page 28
Programming Automatic Rearming:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed and
released fifteen times. The system’s response will be fifteen siren chirps, and
the Status Light flashing fifteen times, pausing, then repeating. Within 10
seconds, press and release the transmitter’s Large Upper Button to turn on
the Automatic Rearming feature (the siren will chirp once) or the Small Lower
Button to turn the Automatic Rearming feature off (the siren will chirp twice).
Feature #16 Doors Lock With Automatic Rearm
(Factory Default Setting On)
This feature adds the automatic locking of the doors to the previous
feature, Automatic Rearming. If this feature is turned on, the doors will lock
when the system rearms itself 90 seconds after being disarmed by the
transmitter. Feature #15 must be turned on for this feature to operate.
Programming Doors Lock With Automatic Rearming:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released sixteen times. The system’s response will be sixteen siren
chirps, and the Status Light flashing sixteen times, pausing, then repeating.
Within 10 seconds, press and release the transmitter’s Large Upper Button
to turn this feature on (the siren will chirp once) or the Small Lower Button
to turn this feature off (the siren will chirp twice).
Feature #17
3 / 45 Second Arming Delay
(Factory Default Setting 3 Second)
This feature determines how long after the Arming confirmation chirp
that the system becomes fully Armed. The Arming Delay applies to the
system Arming regardless if it occurs from using the transmitter, Last Door
Arming or Automatic Rearming.
Programming 3 / 45 Second Arming Delay:
Follow Steps 1 to 4 on page 20; at Step 4 the Valet Switch will be pressed
and released seventeen times. The system’s response will be seventeen siren
chirps, and the Status Light flashing seventeen times, pausing, then repeat-
ing. Within 10 seconds, press and release the transmitter’s Large Upper
Button to configure the system with a 3 second Arming Delay (the siren will
chirp once) or the Small Lower Button to configure the system with a 45
second Arming Delay (the siren will chirp twice).
Page 29