background image

ENTER THE VEHICLE

AND USE YOUR KEY TO
TURN THE IGNITION ON

If the SecureCode entry of the Valet Switch is the “as received” default

setting of “1 press”, the system will disarm the moment the Valet Switch is
released from the single press.  If a customized SecureCode has been
programmed, the system will disarm a few seconds after the correct entry.
If an incorrect entry is made, the system will not disarm.

A procedure which separate, but similar, to an Emergency Override is the

Easy Valet mode, which prevents the system from performing any automatic
arming operations which may be programmed to occur.  Easy Valet mode is
explained on page 14.

    WITHIN 5
 SECONDS OF
TURNING THE
IGNITION ON,
  ENTER THE
SECURECODE BY
PRESSING THE
VALET SWITCH

THE SYSTEM WILL DISARM

Page 12

REMOTE PANIC

To Activate Panic:
Press & Hold the Large Upper Button for 3 Seconds

To Deactivate Panic:
Press & Release the Large Upper Button

THE SIREN SOUNDS

THE DOORS WILL

UNLOCK*

THE PARKING LIGHTS

WILL FLASH

3

SECONDS

* An optional doorlock interface must be installed.

Page 13

Upon Activating Panic:

• The electronic siren will sound.
• The vehicle’s exterior parking lights will flash.
• The vehicle’s doors will unlock.*

- The Panic feature is designed for situations in which the user feels threat-

ened and/or a need to attract attention.

- Panic can be activated anytime, whether the vehicle’s ignition is turned

on or off, and has a 30 second duration (60 seconds is optional) unless it
is deactivated using the remote control.

- At the end of the Panic cycle the system will reset, enter the armed state,

and lock the doors.*

* An optional doorlock interface must be installed.

3

SECONDS

TYPICALLY USED FOR

OPTIONAL TRUNK

RELEASE

IF ARMED, THE SYSTEM
WILL DISARM, WITH
3 SIREN CHIRPS
AND 1 LIGHT
FLASH

IF THE SYSTEM IS NOT ARMED,

CONFIRMATION IS 1 SIREN CHIRP

AND 1 LIGHT FLASH

THE DOORS WILL UNLOCK*

To Activate the Auxiliary Output:
Press & Hold the Small Middle Button for 3 Seconds

AUXILIARY OUTPUT (Trunk Release)

* An optional doorlock interface must be installed.

- The Auxiliary Output may be activated anytime, provided the vehicle’s

ignition is off.  While the ignition is on, the Auxiliary Output can be
operated as long as a vehicle door is open; this prevents the output from
being accidentally activated while driving.

- If feature #6 is programmed to have the Auxiliary Output disarm the

system, the doors will unlock when it is activated; and there is an audible
and visual confirmation: 3 siren chirps and one light flash if the system
also disarms, and one chirp and light flash otherwise.

Summary of Contents for 328i 3





















Reviews: