background image

Page 32

TRANSMITTER “2 BUTTON” OPERATION

Programmable feature #22 changes the configuration of how the trans-

mitter operates the system.  In the factory default setting of “1 Button
Operation”, a single transmitter button alternates Arming and Disarming the
system with every press of the button.  When this feature is programmed to
the “2 Button Operation” setting, one of the transmitter’s buttons will only
Arm the system, and a second button will only disarm the system.  An
optional transmitter with four buttons is available; an order form is found on
page 36.

* An optional doorlock interface must be installed

To Arm the System:

THE DOORS WILL LOCK*

THE PARKING LIGHTS

FLASH TWICE

TO  CONFIRM

   ARMING

THE SIREN CHIRPS TWICE

TO  CONFIRM ARMING

3 Button Transmitter

Press & Release the Large Upper Button

OR

Press & Release the “Arm/Lock” Button (     )

Optional 4 Button Transmitter

THE PARKING LIGHTS

WILL FLASH:

ONCE TO

CONFIRM

DISARMING

THE SIREN WILL CHIRP

ONCE TO CONFIRM
DISARMING

THE DOORS WILL UNLOCK*

To Disarm the System:

3 Button Transmitter

Press & Release the Small Center Button

OR

Press & Release the “Disarm/Unlock” Button (     )

Optional 4 Button Transmitter

J

U

Page 33

* An optional doorlock interface must be installed

THE SIREN SOUNDS

THE PARKING LIGHTS

WILL FLASH

To Deactivate Panic:

Press & Release either button

To Activate “Enhanced Panic”:

“Enhanced Panic” allows you to activate Remote

Panic from either the Arming button or Disarming
button; the former locks the doors and the latter
unlocks the doors when Remote Panic is activated.

 Hold 3
seconds

 OR

 Hold 3
seconds

 OR

OR

3 Button Transmitter

Press & Hold for 3 Seconds the Large Upper Button
OR the Small Center Button

Press & Hold for 3 Seconds  the “Arm/Lock” Button (     )
OR  the “Disarm/Unlock” Button (     )

Optional 4 Button Transmitter

THE DOORS WILL LOCK

LOCK OR UNLOCK*

To Silently Arm and Disarm the System:

3 Button Transmitter

Press & Release the Small Lower Button Twice

OR

Press & Release the “Auxiliary Output” Button ( II ) Twice

Optional 4 Button Transmitter

2 X

2 X

THE PARKING LIGHTS

WILL FLASH TWICE

THE DOORS WILL LOCK*

Silent Arming and Silent Disarming are both operated

by double-pressing the same transmitter button.

J

U

Summary of Contents for 328i 3





















Reviews: