Page 38
FEATURES PROGRAMMING CHECKLIST
This checklist will assist you when programming features. Before
attempting feature programming, please carefully read pages 20 and 21 for
the entire features programming details and instructions to become familiar
with the features and the programming procedure. A detailed explanation
of each of the programmable features is found on pages 22 through 31.
To best use this checklist, mark each applicable box with “\” next to the
feature to be changed before entering features Programming Mode. As each
feature is programmed, change its mark to “X”.
To program features, follow these steps:
Step 1 - Turn the ignition “off”, and press the Valet Switch 5
times.
(the system will respond a siren chirp, then briefly
sounding the siren and the Status Light begins
flashing)
Step 2 - Press the Valet Switch the same number of times as the
desired feature number.
(the system will acknowledge the Valet Switch entry
by repeating the same number of siren chirps and the
Status Light flashes an equal amount)
Step 3 - Press the transmitter’s Large Upper Button to turn the
feature “on”, or press the Small Lower Button to turn
the feature “off”.
(turning the feature “on” is indicated by one siren
chirp and the Status Light being on; turning the feature
“off” is indicated by two siren chirps and the Status
Light being off)
Repeat - Steps 2 and 3 for each feature to be changed
#
FEATURE
DEFAULT
1
TRANSMITTER PROGRAMMING
2
SECURECODE PROGRAMMING
1 press- see page 23
3
Chirp Confirmation
ON (large upper button)
4
30 / 60 Second Activated Alarm Cycle
30 Seconds (large upper button)
5
Automatic Sensor Zone Bypass
ON (large upper button)
6
Auxiliary Output Also Disarms System
ON (large upper button)
7
Last Door Arming
ON (large upper button)
8
Doors Lock With Last Door Arming
OFF (small lower button)
9
Parking Light Illumination Upon Disarm
OFF (small lower button)
10
Starter Interrupt Operates In Valet Mode OFF (small lower button)
11
.8 / 3 Second Doorlock Pulse
.8 Second (large upper button)
12
Ignition-Activated Vehicle Recovery
OFF (small lower button)
13
Door-Activated Vehicle Recovery OFF (small lower button)
14
Transmitter-Activated Vehicle Recovery OFF (small lower button)
15
Automatic Rearming
ON (large upper button)
16
Doors Lock With Automatic Rearming
ON (large upper button)
17
3 / 45 Second Arming Delay
3 Second (large upper button)
18
Doors Lock At Ignition “On”
ON (large upper button)
19
Doors Unlock At Ignition “Off”
ON (large upper button)
20
THIS FEATURE IS NOT USED ON THE 328i
3
21
Open Door Bypass To Features 18, 19 ON (large upper button)
22
One / Two Button Arming / Disarming One Button (large upper button)
If no programming activity occurs within a 10 second
period, the features Programming Mode will expire.
The system exiting features Programming Mode
is indicated by the siren briefly sounding.
Page 39
