manualshive.com logo in svg

Crestron TPMC-10, Operation Manual, Page: 6 / 60

Share
Download
Crestron TPMC-10 Operation Manual Download Page 6

Isys i/O

™

 WiFi Touchpanel 

Crestron 

TPMC-10

  

design achieves an optimal viewing angle under any use, with four programmable 
hard pushbuttons and an integrated thumb pad to provide tactile control of audio 
volume, channel selection, OSM navigation, or even pan/tilt cameras. 

Boasting 16-bit color depth, the TPMC-10 display produces incredible 3D graphics, 
dynamic text, and full-motion animations, all with astonishing speed. Through 
programmatic control, the GUI effectively merges conventional touchpanel control 
with PC functionality.  

To complement its incredible graphics and computing capabilities, the TPMC-10 
delivers great sounding audio from its built-in 10-watt biamplified speaker system, 
and stereo headphone output.  

The TPMC-10 communicates only with an Ethernet-enabled Crestron

®

 2-Series 

control system (Cresnet

®

 system) through a third-party Wi-Fi access point (not 

supplied). The two-way communications provide control of third-party and Cresnet 
devices, with dynamic on-screen feedback for real-time confirmation of commands. 
(Refer to “Typical System Configurations” on page 16 for more details.) 

Part Number Compatibility 

Due to production changes, certain information in this manual applies only to 
recently manufactured TPMC-10 units. The following table lists the differences 
based on the unit part numbers. 

Feature/Part Number Compatibility 

TPMC-10 Part Numbers 

Feature Differences 

6002572 6002822 6002881 

Touchscreen Display 
 Brightness 
 Contrast 
 Viewing 

Angle 

 

 
150 nits 
250:1 
±45° horizontal, 
+15/-35° vertical 

 
230 nits 
500:1 
±60° horizontal, 
+35/-65° vertical 

 
230 nits 
500:1 
±60° horizontal, 
+35/-35° vertical 

Embedded 

WiFi 

Radio 

802.11b 802.11b 802.11g 

NOTE:

 Part numbers can be found on the silver label affixed to each device 

Embedded PC Applications 

With a host of embedded applications, the TPMC-10 provides a truly integrated 
digital media asset management solution. Applications include: 

• 

MS Internet Explorer

® 

 

• 

MS Inbox (supports e-mail client) 

• 

Windows Media Player

®

  

• 

WordPad 

• 

Adobe Acrobat 6.0 (limited feature set) 

• 

Viewers: MS Word/PowerPoint/Excel/Adobe

®

 Acrobat

®

 

• 

Remote Desktop (control remote PCs on LAN) 

Future PC applications and features may be added, as they become available, 
through Crestron updates. 

2  

•

  Isys i/O

™

 WiFi Touchpanel: TPMC-10 

Operations Guide - DOC. 6284B 

Summary of Contents for TPMC-10





























































Reviews:

No comments