Crestron
TPMC-10
Isys
i/O
™
WiFi Touchpanel
USB Mini-B Port
This port is for future use. An interface cable is included.
Mini-VGA Port
One mini-VGA port (DB15HD cable included) RGBHV (VGA) output; aspect ratio:
4:3 SVGA; output resolution: 800 x 600.
Battery
The removable, lithium-polymer 14.8 Volt, 2000 mAh, battery supplies power to the
TPMC-10.
Battery Compartment Lock
Releases or secures the removable lithium-polymer battery in the TPMC-10.
Docking Station Interface
When the TPMC-10 is docked in the optional TPMC-10-DS docking station, this
port provides connectivity to the power supply and the optional mouse and keyboard
plugged into the docking station.
Communication LED
The LED is solid green when the communication signal level is good, blinks yellow
if the signal level is poor, and is off when communication is lost.
Power Pushbutton and LED
The pushbutton is used to cycle the TPMC-10 between on and standby modes. The
LED indicates the battery’s current status and charge level:
•
Off – the TPMC-10 is powered off
•
Solid green – the battery power level is OK
•
Solid yellow – the battery power level is low
•
Blinking yellow – the battery power level is critically low
When using the external power supply directly or via the docking station, the LED
indicates the following:
•
Solid green – the unit is being powered by the power supply, and the
battery is fully charged
•
Blinking green – the unit is being powered by the power supply, and
the battery is charging
Programmable Hard Pushbuttons and Thumb Pad
These hard pushbuttons and the four-way thumb pad are programmable and can
provide tactile control of many functions such as audio volume, channel selection,
OSM navigation, or even pan/tilt cameras. Fixed join numbers are assigned to these
buttons as shown below. (Refer to “TPMC-10 Input/Output Signals” on page 23.)
Operations Guide – DOC. 6284B
Isys i/O
™
WiFi Touchpanel: TPMC-10
•
7