Crestron
TPMC-10
Isys
i/O
™
WiFi Touchpanel
Setup Screen
The setup screen is used to perform basic configuration procedures prior to regular
operation of the touchpanel.
NOTE:
During regular operation of the touchpanel, there are three ways to activate
the setup functions: either place a button on the project main page and assign the
reserved join number (17242) that activates Setup (refer to “Programming Embedded
Windows Applications” on page 41); hold your finger on the screen, use the stylus to
press the Reset button, and continue to keep your finger on the screen until the setup
screen appears (about 90 seconds); or press the hard pushbuttons in the sequence 1,
2, 3, 4, 1, 2, 3, 4 (refer to “Programmable Hard Pushbuttons” on page 7).
SETUP MENU
The SETUP MENU functions control the basic operation of the TPMC-10, such as
setting stylus properties, screen calibration, screen brightness, and audio volume.
Touch Screen
Selecting the
Touch Screen
button displays the following “Stylus Properties”
window that allows you to set stylus properties and perform a screen calibration. Use
the stylus and follow the on-screen instructions to calibrate the display.
Use the supplied stylus and follow the
Double-Tap
tab instructions to customize the
unit’s sensitivity to your use of the stylus.
Operations Guide – DOC. 6284B
Isys i/O
™
WiFi Touchpanel: TPMC-10
•
11