Isys i/O
™
WiFi Touchpanel
Crestron
TPMC-10
Expanded MC2E System Tree
C2ENET-1-Device Slot in Configuration Manager
To incorporate a TPMC-10 into the system, the control system requires either a plug-
in Ethernet card, or a built-in Ethernet port. The MC2E control system has a built-in
Ethernet port in Slot 5 that can accept the TPMC-10 two-way wireless Ethernet
touchpanel. The slot allows Cresnet communication between the touchpanel and the
control system.
Drag the TPMC-10 from the Touchpanels | Touchpanels (Ethernet) folder of the
Device Library
and drop it on the C2ENET-1 in Slot 5. The MC2E displays the
TPMC-10 at its default IP-ID location, “03,” as shown in the following graphic.
C2Net Device, Slot 9
Expand the system tree in the lower pane and double-click the TPMC-10 icon to
open the “Device Settings” window for the touchpanel. Select the
IP Net Address
tab
to change the touchpanel, or to set the Default IP Address as shown on the next page.
For more information on setting the IP ID of the TPMC-10, refer to “WiFi SETUP”
which begins on page 13.
NOTE:
The correct address here would be 127.0.0.1, or the control system IP
address.
20
•
Isys i/O
™
WiFi Touchpanel: TPMC-10
Operations Guide - DOC. 6284B