Isys i/O
™
WiFi Touchpanel
Crestron
TPMC-10
Analog Input & Output Signal Descriptions
TOUCHPANEL
SIGNAL NAME
AND TYPE
VT Pro-e
JOIN TYPE
VT Pro-e
OBJECT DESCRIPTION
Analog
Touch/
Feedback
Join
Slider
Reports the current value being sent by
the slider and updates the value as it
changes during run time.
Analog outputs:
<
an_act1
> through
<
an_act4000
>
Analog
Feedback
Join:
Left
Top
Width
Height
Embedded
Application
Reports the position and size of the
window in pixels (1d = one pixel) when the
user opens the embedded application.
(The outputs do not report the position or
size when sent by the control system.)
If a Left join is defined, the output reports
the number of pixels from the left side of
the window to the left edge of the screen.
If a Top join is defined, the output reports
the number of pixels from the top of the
window to the top edge of the screen.
If a Height join is defined, the output
reports the height of the window.
If a Width join is defined, the output
reports the width of the window.
Analog
State Join
and Mode -
Active and
Inactive
Button
Legend
Selects the mode (appearance) of the
button or legend, in both the active and
inactive states.
Valid values can range from 0d to 99d for
the active state; and 0d to 99d for the
inactive state.
The actual range of values depends on the
number of modes defined in the VT Pro-e
project. For example, if five modes are
defined for the active state, there will be
five valid values for that join.
Analog inputs:
<
an_fb1
> through
<
an_fb4000
>
Analog
State Join
and Mode
Border,
Clock,
Gauge,
Digital
Gauge,
Hex
Gauge,
% Gauge,
Slider,
Timer
Selects the mode (appearance) of the
object.
Valid values can range from 0d to 99d.
The actual range of values depends on the
number of modes defined in the VT Pro-e
project. For example, if five modes are
defined, there will be five valid values for
that join.
(continued on next page)
26
•
Isys i/O
™
WiFi Touchpanel: TPMC-10
Operations Guide - DOC. 6284B